Accessories

This is a replacement part to work with: Titan TTB774VAC Wet & Dry Vacuum Cleaner Wickes Wet & Dry Vacuum Cleaner Wickes Wet & Dry Vacuum Cleaner with Power Take...

This is a replacement part to work with: Dewalt DCN930 Framing Nailer Does not include screws You are purchasing the 3d printed parts only. Any tools & cases shown are...

This carrier is designed to work with: Dewalt DCN930 Framing Nailer Designed to allow an additional set of nails to be fixed to the side of the DCN930 Nailer. Equipped...

Designed to help clear a used nozzle. Simply remove the nozzle and push in the Tool+ nozzle cleaner to squeeze out any excess. Available in packs of 5.   You are...

Compatible with many brands and models including Karcher, Shark, Titan & Wickes. Measure the end of the hose on your vacuum to check fitment.   You are purchasing the 3d...

Designed to prevent your sealant tubes from drying out. Simply remove the nozzle, and screw on a Tool+ cap. Available in packs of 5.   You are purchasing the 3d...

Place the dust collector against the wall before drilling to catch all of the debris. The dust collector has thin walls so that you can use tape to secure, if...

Designed to easily mark the centre line on a door or any straight piece of wood.     You are purchasing the 3d printed parts only. Any tools & accessories shown...

Designed to quickly measure and mark doorframes before installing new architraves. Use a sharp pencil to mark against the edge to create a perfect line.    You are purchasing the...

Tool+ A-Frame door stand is designed to make working on doors more flexible, especially when you are limited on space.  For multiple uses including: Standing doors vertically to install hinges...

This carrier is designed to work with: Milwaukee M18 Batteries (all sizes) You can buy replacement handles or parts here. You are purchasing the 3d printed carrier only. Any tools &...

This mount is designed to work with: Dewalt TOUGHSYSTEM® 2.0 toolboxes Deep Compact DS166 DS300 DS400 DS450 Apple AirTag Samsung Galaxy SmartTag2 Screws not included. You should use 20-25mm screws...